| Meiter's Specialty Sales |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| AirFlo Salt Spreaders |
FEATURESAll PSV units are constructed with one piece 304 stainless
steel hopper sides and conveyor, stainless steel conveyor bottom, single
lift point and internal stainless steel bracing. Units come standard with
Top Screens, Inverted ‘V’ and Hold Down Kit.
ELECTRIC DRIVE
DUAL MOTOR
Separate electric motors
power conveyor and spinner.
Highly efficient conveyor
drive ensures low amp draw and is patent pending.
Cab control includes
independent and variable conveyor & spinner speed with blast control.
ENGINE DRIVE
Completely Self Contained
Unit Includes: Electric clutch, electric throttle and 12 volt battery with a
self contained electrical system.
Powered by the Briggs & Stratton ‘Intek’ 10.5 HP I.C. Engine or HP
Honda engine.
steel hopper sides and conveyor, stainless steel conveyor bottom, single
lift point and internal stainless steel bracing. Units come standard with
Top Screens, Inverted ‘V’ and Hold Down Kit.
ELECTRIC DRIVE
DUAL MOTOR
Separate electric motors
power conveyor and spinner.
Highly efficient conveyor
drive ensures low amp draw and is patent pending.
Cab control includes
independent and variable conveyor & spinner speed with blast control.
ENGINE DRIVE
Completely Self Contained
Unit Includes: Electric clutch, electric throttle and 12 volt battery with a
self contained electrical system.
Powered by the Briggs & Stratton ‘Intek’ 10.5 HP I.C. Engine or HP
Honda engine.
FEATURESFully welded hopper and gussets.
45° sloped sides and 23° sloped front & rear panels allow for ease of material flow.
Rear feedgate door controlled by a self-locking screwjack handle.
Fully enclosed material chute with 4 externally adjustable deflectors and two internal baffles, all adjustable
without tools. Diverter chute enclosed for quick unloading.
Chute is vertically adjustable in 3” increments and can swing above the bottom of the conveyor for ground or
bulk storage.
20” spinner disc supplied with 6 removable fins.
Spinner and conveyor powered by independent high speed hydraulic motors for efficient operation.
24” wide conveyor chain with bolt in bedplate and spring loaded chain take ups.
OPTIONS
304 Stainless Steel hopper.
Integral built in hopper extensions.
Top screens
Dump body mount with tailgate latch bar or chassis mount kit
Fenders
Chain oiler
Inverted V
Cab shield
Grease tubes and chain tighteners installed to the rear.
AF-2000 Product Literature
45° sloped sides and 23° sloped front & rear panels allow for ease of material flow.
Rear feedgate door controlled by a self-locking screwjack handle.
Fully enclosed material chute with 4 externally adjustable deflectors and two internal baffles, all adjustable
without tools. Diverter chute enclosed for quick unloading.
Chute is vertically adjustable in 3” increments and can swing above the bottom of the conveyor for ground or
bulk storage.
20” spinner disc supplied with 6 removable fins.
Spinner and conveyor powered by independent high speed hydraulic motors for efficient operation.
24” wide conveyor chain with bolt in bedplate and spring loaded chain take ups.
OPTIONS
304 Stainless Steel hopper.
Integral built in hopper extensions.
Top screens
Dump body mount with tailgate latch bar or chassis mount kit
Fenders
Chain oiler
Inverted V
Cab shield
Grease tubes and chain tighteners installed to the rear.
AF-2000 Product Literature
This rugged compact spreader will
spread anything - even wet sand.
With it’s simple electric drive and
rubber belt conveyor - it is ready to
tackle your most demanding ice control
jobs.
Receiver Hitch Mount enables easy
mounting and dismounting.
• Body Construction (Stainless) - 14
ga.
• Side Slope - 60°
• Belt Conveyor Width - 11 1/2"
• Hopper Width - 38 1/2"
• Hopper Height - 29"
• Overall Length - 27"
• Spread Pattern Width - 20"
• Spinner Diameter - 12"
• Capacity - 6.5 cu. ft.
• Approximate Weight -
Empty 238 lbs.
Full (Salt) 538 lbs.
Full (Sand) 863 lbs.
spread anything - even wet sand.
With it’s simple electric drive and
rubber belt conveyor - it is ready to
tackle your most demanding ice control
jobs.
Receiver Hitch Mount enables easy
mounting and dismounting.
• Body Construction (Stainless) - 14
ga.
• Side Slope - 60°
• Belt Conveyor Width - 11 1/2"
• Hopper Width - 38 1/2"
• Hopper Height - 29"
• Overall Length - 27"
• Spread Pattern Width - 20"
• Spinner Diameter - 12"
• Capacity - 6.5 cu. ft.
• Approximate Weight -
Empty 238 lbs.
Full (Salt) 538 lbs.
Full (Sand) 863 lbs.